Overview

The Allied Telesis IS230 Series is a  multipurpose product line of managed Layer 2 switches ideal for industrial applications, including manufacturing, rail transportation (telecommunication and signaling), road transportation (traffic control), and Smart Cities.

With fanless operation and a wide operating temperature range of -40° to 75°C, the robust IS230 Series easily tolerates harsh and demanding environments, such as those found in industrial and outdoor deployments.

An integrated voltage regulator ensures the PoE output voltage always stays at the rated value, regardless of any fluctuations in the input voltage of powered devices. An extended input voltage range makes the IS230 Series ideal for deployment in traffic control cabinets.

Network resiliency

The IS230 Series supports highly stable and reliable ICT network switching, with recovery times down to 50ms. The IS230 can be customized with the most appropriate mechanism and protocol to prevent network connection failure.

Choices include Allied Telesis Ethernet

Protection Switched Ring (EPSRing™), and the standards-based ITU-T G.8032.

Securing the Network Edge

Ensuring data protection means controlling network access. Protocols such as IEEE 802.1X port-based authentication guarantee that only known users are connected to the network. Unknown users who physically connect can be segregated into a pre-determined part of the network. This offers network guests Internet access, while ensuring the integrity of private network data.

Quality of Service

Comprehensive wire-speed QoS provides flow-based traffic management with Port/Tag Base and Type of Service prioritization. Bandwidth control limits ingress/

egress traffic and broadcast/multicast/flooded unicast packets.

Gigabit and Fast Ethernet support

The IS230 Series offers combo ports supporting both Gigabit and Fast Ethernet Small Form-Factor Pluggables (SFPs). Support for both SFP types allows organizations to stay within budget even as they migrate to faster technologies.

Configurable power budget

On PoE-sourcing IS230 switches, all LAN ports source POE+ up to 30W.

You can configure both the overall power budget and the power feeding limit on a per-port basis, to establish a close relationship between the power sourcing feature and the real capabilities of the external Power Supply Unit (PSU)1.

Dual power inputs

The IS230 Series provides redundant power inputs for higher system reliability; the power inputs are protected against reverse polarity and over-current.

ECO friendly

The IS230 Series are Energy Efficient Ethernet (EEE) devices. They facilitate power saving by switching off parts of the LAN that are not transmitting or recieving data. This sophisticated feature can significantly reduce operating costs, by reducing the

power requirements of the switch and any associated cooling equipment.

Key Features

Full Gigabit, wire speed ports

Uplink combo ports

100/1000Mbps SFP support

Flexible management interface (GUI, SNMP, CLI, TELNET and SSH)

Ethernet Protection Switched Ring (EPSRing™)

Ethernet Ring Protection Switching (ITU-T G.8032)

VLAN stacking (Q-in-Q)

Multicast support (IGMP and MLD snooping)

Loopback detection and storm control

Port mirroring

Port trunking/link aggregation (LACP)

Link Layer Discovery (LLDP)

IEEE 802.3at PoE+ sourcing (30W)

-40 to +75oC wide-range operating temperature

Dual power inputs with voltage boost converter

Alarm output

Fanless design

Performance

Up to 8K MAC addresses

Packet buffer memory: 512KB (4Mb)

8 priority QoS queues

4094 configurable VLANs

256 simultaneous VLANs

Supports 9KB jumbo frames

Up to 255 Layer 2 multicast entries

Environmental Specifications

Operating temperature range: -40°C to 75°C (-40°F to 167°F)

Storage temperature range: -40°C to 85°C (-40°F to 185°F)

Operating humidity range:

10% to 95%RH non-condensing

Storage humidity range:

10% to 95%RH non-condensing

Operating altitude

3,000m maximum (9,843ft)

Mechanical

EN 50022, EN 60715 Standardized mounting  

on rails

Environmental Compliance

RoHS

China RoHS

WEEE

Ordering Information

Switches

The DIN rail and wall mount kits are included.

AT-IS230-10GP-80

8x 10/100/1000T, 2x 100/1000X SFP combo, Industrial Layer 2 Switch, POE+ support (120W)

Supported SFP Modules

Refer to the installation guide for the recommended Max.

Operating Temperature according to the selected SFP module.

1000Mbps SFP Modules

AT-SPBD10-13

10 km, 1G BiDi SFP, LC, SMF (1310Tx/1490Rx)

AT-SPBD10-14

10 km, 1G BiDi SFP, LC, SMF (1490Tx/1310Rx)

AT-SPBD20-13/I

20 km, 1G BiDi SFP, SC, SMF, I-Temp

(1310Tx/1490Rx)

AT-SPBD20-14/I

20 km, 1G BiDi SFP, SC, SMF, I-Temp

(1490Tx/1310Rx)

AT-SPBD40-13/I

40 km, 1G BiDi SFP, LC, SMF, I-Temp

(1310Tx/1490Rx)

AT-SPBD40-14/I

40 km, 1G BiDi SFP, LC, SMF, I-Temp

(1490Tx/1310Rx)

AT-SPEX

2 km, 1000EX SFP, LC, MMF, 1310 nm

AT-SPLX10

10 km, 1000LX SFP, LC, SMF, 1310 nm

AT-SPLX10/I

10 km, 1000LX SFP, LC, SMF, 1310 nm, I-Temp

AT-SPLX40

40 km, 1000LX SFP, LC, SMF, 1310 nm

AT-SPSX

550 m, 1000SX SFP, LC, MMF, 850 nm

AT-SPSX/I

550 m, 1000SX SFP, LC, MMF, 850 nm, I-Temp

AT-SPZX80

80 km, 1000ZX SFP, LC, SMF, 1550 nm

100Mbps SFP Modules

AT-SPFX/2

2 km, 100FX SFP, LC, MMF, 1310 nm

AT-SPFX/15

15 km, 100FX SFP, LC, SMF, 1310 nm

AT-SPFXBD-LC-13

15 km, 100FX BiDi SFP, LC, SMF

(1310 Tx/1550 Rx)

AT-SPFXBD-LC-15

15 km, 100FX BiDi SFP, LC, SMF

(1550 Rx/1310 Tx)