Product overview

The Flex500 platform is a modular and programmable electronic controller that can flexibly adapt to the control needs of different industrial turbine equipment. It supports multiple software cores and communication protocols, has high reliability and scalability, and is commonly used in speed control, load sharing, process control, and other scenarios.

Core components and functions

Hardware specifications and models

Installation method and power type:

Front panel installation: Supports LVDC and HVAC/DC power supplies, such as Flex500 (front panel installation, LVDC, OCP) (part number: 8200-1343), Flex500 (front panel installation, HVAC/DC, OCP) (part number: 8200-1344).

Rear panel installation: Supports LVDC, HVAC/DC power supply and Zone 2 hazardous area configuration, such as Flex500 (rear panel installation, LVDC, Zone-2) (part number: 8200-1355).

Core functions: Integrated processor, input/output (I/O) module, communication interface, supporting real-time control and data processing.

Software and Programming Support

GAP software programming: Customize programming through Woodward’s Graphic Application Program (GAP), supporting logic development for MicroNet and Atlas controllers.

Core Source License: such as CSM -505XT Core Source License (part number: 8447-5006), CSM – Vertex Core Source License (part number: 8447-5008), which allows users to run specific control algorithms on Flex500.

Communication and Expansion Module

LINKnet HT and RTCnet modules: support distributed I/O expansion, such as RTD input, thermocouple input, 4-20 mA signal processing, etc. (refer to the module list in the “Electronic Control” section).

Network compatibility: Can connect to MicroNet systems, supports communication protocols such as CANopen and Ethernet, and adapts to complex industrial network architectures.

Application area 

Industrial turbine control: used for speed regulation, load sharing, and protection functions of steam turbines and gas turbines.

Compressor control: In conjunction with Vertex controllers and other equipment, achieve anti surge control and operational optimization of the compressor.

Process control: supports industrial process automation scenarios such as air/fuel ratio control and pressure regulation.

Accessories and Documents

Auxiliary module: Can be paired with LinkNet HT analog/digital module and RemoteView software (license part number: 8928-5311) to achieve remote monitoring.

Document reference: The product specification sheet (such as Product Spec: 03433) and user manual (Manual: 26838) provide installation, programming, and maintenance guidance.

Advantage

Flexibility: Modular design supports configuring I/O modules and communication interfaces according to requirements.

Reliability: Suitable for industrial environments and supports installation in hazardous areas such as Zone 2.

Compatibility: Seamless integration with other Woodward products such as 505 controllers and MicroNet systems, reducing system complexity.

Characteristic

Modular design, strong adaptability

Flexible hardware configuration

Support front/back panel installation, adapt to different device layouts, optional LVDC, HVAC/DC power supplies, and Zone 2 hazardous area models (such as 8200-1355) to meet diverse environmental needs.

Expandable I/O modules such as LINKnet HT and RTCnet, flexibly adding functions such as RTD input, thermocouple, 4-20 mA signal processing, etc., to adapt to complex control scenarios.

Software core compatibility

Through CSM core source licenses (such as 505XT, Vertex core), it supports running different control algorithms and can adapt to the control logic of different devices such as steam turbines and compressors without the need to replace hardware.

High performance and reliability

Real time control capability

Integrated high-efficiency processor, supporting fast data processing and real-time response, suitable for industrial turbine systems sensitive to speed and load changes.

Industrial grade durability

The design meets the requirements of industrial environments, and some models support installation in hazardous areas (Zone 2), with anti vibration, high temperature resistance, and reduced risk of failure.

Communication and integration advantages

Multi protocol compatibility

Supports communication protocols such as CANopen and Ethernet, and can seamlessly connect with MicroNet systems and remote monitoring software (such as RemoteView, license 8928-5311) to achieve system level data exchange and remote operation and maintenance.

Integrate with Woodward ecosystem

Can be paired with GAP software, ProTech overspeed protection device, VariStroke actuator and other products to build a full chain control solution and reduce integration complexity.

Development and maintenance convenience

GAP programming flexibility

Using the graphical programming tool GAP, supporting custom control logic development, compatible with old version program migration, and shortening development cycles.

Standardized documentation and support

Provide detailed product specifications (03433) and manuals (26838), along with supporting technical support, for easy installation, debugging, and troubleshooting.

Cost and scalability advantages

Reduce hardware costs

Modular design avoids redundant procurement of dedicated controllers, adapts to different scenarios through software configuration, and reduces hardware investment.

Long term scalability

Support firmware upgrades and module extensions, adapt to the iterative needs of industrial systems, and protect long-term investments.